Filter
Top Products
Change the copy settings for the current job
You can customize the copy settings of the HP All-in-One to handle nearly any copy task.
This section contains the following topics:
•
Make multiple copies of the same original
•
Change copy speed or quality
Make multiple copies of the same original
You can set the number of copies from the control panel of the HP All-in-One or from the
HP Photosmart Software. This task explains how to set the number of copies from the
control panel only.
NOTE: For information on initiating copies from the software, see the software
portion of the HP Photosmart Software Help.
To make multiple copies of an original from the control panel
1. Load paper in the input tray.
2. Load your original print side down on the right front corner of the glass.
3. Press Settings.
The Settings menu appears.
Chapter 9
56 Use the copy features
Use the copy features