HP (Hewlett-Packard) C4400 All in One Printer User Manual


 
Out of paper
Try the following solutions to resolve the issue. Solutions are listed in order, with the most
likely solution first. If the first solution does not solve the problem, continue trying the
remaining solutions until the issue is resolved.
Solution 1: Replace the rear door
Solution 2: Make sure the paper is loaded correctly
Solution 3: Check the print settings
Solution 4: Clean the paper feed rollers with the HP Paper Feed Cleaning Kit
Solution 5: Clean the rollers
Solution 6: Contact HP support for service
Solution 1: Replace the rear door
Solution: If you removed the rear door to clear a paper jam, replace it. Gently push
the door forward until it snaps into place.
Cause: The rear door was removed from the product.
If this did not solve the issue, try the next solution.
Solution 2: Make sure the paper is loaded correctly
Solution: Make sure that the paper is loaded correctly in the input tray.
For more information, see:
Load paper” on page 20
Cause: The paper was not loaded correctly.
If this did not solve the issue, try the next solution.
Solution 3: Check the print settings
Solution: Check the print settings.
Check the paper type setting to make sure it matches the type of paper loaded in
the input tray.
Check the quality setting. Use a higher quality setting to increase the amount of
ink used for printing.
Errors 193
Troubleshooting