Filter
Top Products
local system. To use any custom network port for the customized installer, the port must be
created identically on the system where it will be used.
Figure 3-13 Specify TCP/IP Port dialog box
Choose from the following options on the Specify TCP/IP Port dialog box.
◦
Click IP Address to make the field available for typing the TCP/IP address for the
product. Only numerals are allowed in this field. If this option is selected, you must type
at least one digit in the IP Address field to prevent an error message from appearing
and prompting you for a valid IP address.
◦
Click IP Hostname to make the field available for typing the IP hostname for the product.
Any characters are allowed in this field, but an error message appears if spaces are
included in the field. If this option is selected, you must type at least one character in the
IP Hostname field to prevent an error message from appearing and prompting you for
a valid IP hostname.
◦
Click Hardware Address to make the field available for typing the hardware address of
the product. It accepts any characters but limits the entry to 12 characters. If this option
is selected, you must type at least one character in the Hardware Address: field to
prevent an error message from appearing and prompting you for a valid hardware
address.
After you select any of the options, type the appropriate name or address, and then click
Next, the Drivers dialog box opens (see
Figure 3-15 Drivers dialog box on page 101).
For each of the options in the Specify TCP/IP Port dialog box, you can either use the default
port name (as specified in each of the three options) or specify a different name.
ENWW General Microsoft Windows installation instructions 99