Filter
Top Products
Type Specifications Quantity Settings Paper orientation
Cut sheet paper Maximum stack height:
54 mm (2.1 in)
Side to be printed on
facing up
Tough paper Maximum stack height:
54 mm (2.1 in)
Side to be printed on
facing up
Trays 2, 3, 4, and 5 capacity: 54 mm (2.126 in) height or 500 sheets of paper, whichever is less.
Supported paper types include: Cut sheet paper, labels, OHT, glossy paper, glossy film, photo paper,
and tough paper. Basis Weight: 60-220 g/m
2
(16-58 lb).
Duplex printing: Provides automatic two-sided printing (printing on both sides of the paper). Not
available on the HP Color LaserJet CP6015n model, which cannot be upgraded to duplex printing. The
paper size range for automatic duplex printing is 175 to 320 mm (7.2 to 12.6 in) x 210 to 457 mm (8.3
to 18 in). The paper weight range is 60 to 220 g/m
2
(16 to 58 lb)
NOTE: HP Color Laser Presentation Paper, Glossy (Q2546A) is not supported with this product. Using
this type of paper can cause a fuser jam that might require the replacement of the fuser. Two
recommended alternatives are HP Color LaserJet Presentation Paper, Soft Gloss (Q6541A) and HP
Color LaserJet Brochure Paper, Glossy (Q6611A, Q6610A).
NOTE: For a complete list of specific HP-brand paper that this product supports, go to www.hp.com/
sbso/product/supplies.
Custom paper sizes
The following table shows custom paper sizes that are available for the HP Color LaserJet CP6015
Series product.
Table 7-11 PCL 6 custom paper sizes
Tray Dimensions Minimum Maximum
Tray 1 (100-sheet
multipurpose)
Width 98.6 mm (3.9 in) 320 mm (12.6 in)
Length 139.7 mm (5.5 in) 457.2 mm (18.0 in)
915 mm (36.0 in) for banner
printing
Tray 2 (500-sheet) Width 148.0 mm (5.83 in) 297 mm (11.7 in)
Length 210.0 mm (8.26 in) 432 mm (17.0 in)
Trays 3-5 (500-sheet) Width 148 mm (5.8 in) 297 mm (11.7 in)
Length 210 mm (8.3 in) 432 mm (17.0 in)
Duplexing unit Width 174.0 mm (6.9 in) 320.0 mm (12.6 in)
Length 210.0 mm (8.3 in) 457 mm (18.0 in)
Paper-type commands
The PCL 5 escape sequence for paper type is "Esc&n#Wdpapertype", where "n#" is the number of
characters in the paper type plus 1. For example, in the sequence "Esc&n6WdPlain", "Plain" has 5 letters
plus 1, for a total of 6.
Table 7-10 Trays 2, 3, 4, and 5 paper information (continued)
342 Chapter 7 Engineering Details ENWW