Filter
Top Products
226 Processing Job
226 Transfer complete
After these messages appear, a message containing transfer-speed information appears.
10. The download process begins and the firmware is updated on the product. This can take several
minutes. Let the process finish without further interaction with the product or the computer. The
messages described in the section
Printer messages during the firmware update on page 319
appear on the control panel.
NOTE: The product automatically turns off and then on again to activate the update; this can
happen more than once. At the end of the update process, the READY message appears on the
control panel. Do not turn off the product or interfere with the update until you see this message.
11. Print a configuration page and verify that the firmware revision number matches the revision of the
current update.
12. At the command prompt, type bye to exit the FTP command.
13. At the command prompt, type exit to return to the Windows interface.
Macintosh operating systems
1. Make a note of the TCP/IP address on the EIO-Jetdirect page. The EIO-Jetdirect page is the second
page of the configuration page printout. To print a configuration page, see
Determining the current
level of firmware on page 318.
2. Open a Terminal window on the computer. You can find the Terminal program on the computer
hard drive in the Applications/Utilities folder.
3. Type FTP <TCP/IP product ADDRESS> For example, if the TCP/IP address is 192.168.0.90,
type FTP 192.168.0.90
4. Press Enter on the keyboard.
5. When prompted for a user name and password, press Enter.
6. Type put <path>, where <path> is the location where the .RFU file was downloaded from the
Web, including the path. For example, type put /username/desktop/CP6015fw.rfu, and
then press Enter.
NOTE: If the file name or path includes a space, you must enclose the file name or path in
quotation marks. For example, type put "/user name/desktop/CP6015FW.RFU".
To ensure that the entire path to the .RFU file is placed in the put command, type put and a space,
and then drag and drop the .RFU file onto the terminal window. The complete path to the file is
automatically placed after the put command.
7. The download process begins and the firmware is updated on the product. This can take several
minutes. Let the process finish without further interaction with the product or the computer. The
messages described in the section
Printer messages during the firmware update on page 319
appear on the control panel.
ENWW Remote firmware update 323