Filter
Top Products
All paper types support the smart duplexing feature, except for paper types that cannot be printed on
both sides (such as labels, transparencies, and envelopes) and the following paper types:
●
Prepunched
●
Preprinted
●
Letterhead
When the paper type is set to Unspecified, the smart duplexing feature is disabled.
To achieve the best print quality when printing on the second side of the page, the product needs to
make adjustments to its print modes. When you select a paper type, you are, in effect, instructing the
product to use a group of settings (such as fuser temperature and print speed) to print the paper with
the best possible quality. This group of settings is known as print mode. A different print mode is used
with each paper type. Print-mode adjustments for the second side of a duplexed page are automatic.
Print on both sides manually
●
Manually Print on 2nd Side is not selected
Select the Print on Both Sides (Manually) check box to print on the second side of the paper for
the HP Color LaserJet CP6015n product model, which does not have a duplexing unit installed.
Also select Print on Both Sides (Manually) on the other HP Color LaserJet CP6015 Series product
models for paper types that are not available when using the automatic duplexing unit, such as
cardstock and thick paper.
Manually printing on the second side of a page is available when you are using the HP PCL 6
driver. If a duplexing unit is installed and manual duplexing is enabled in the driver, the product
automatically prints on both sides of paper types that are supported for automatic duplexing (Letter,
A4, Legal, and 8.5 x 11 only), and forces manual printing on both sides for paper types that are not
supported.
Select the paper type that corresponds to the paper that you are using for the print job. The following
paper types have a different print modes when you manually print on the second side:
◦
Plain
◦
Preprinted
◦
Letterheard
◦
Prepunched
◦
Bond
◦
Recycled
◦
Colored
◦
Rough
NOTE: To make the Print on Both Sides (Manually) check box available in the document options,
select the Allow Manual Duplexing option on the Device Settings tab in the print-driver Properties
tab set. See
Installable Options on page 209.
If you want to print on both sides manually while using paper that is supported for automatic duplexing,
you must select and apply the Not Installed setting on the Duplex Unit (for 2-Sided Printing) option
on the Device Settings tab.
246 Chapter 5 HP Universal Print Drivers for Windows — PS and PCL 5 ENWW