Filter
Top Products
Custom width and height control limits
The minimum paper size for the HP Color LaserJet CP6015 Series product is 98.6 x 139.7 mm (3.9 x
5.5 in) and the maximum is 320 x 457.2 mm. The following table summarizes paper size limits for each
paper-handling device.
Table 5-1 HP PS Universal Print Driver and HP PCL 5 Universal Print Driver custom paper sizes
Tray Dimensions Minimum Maximum
Tray 1 (100-sheet
multipurpose)
Width 98.6 mm (3.9 in) 320 mm (12.6 in)
Length 139.7 mm (5.5 in) 457.2 mm (18.0 in)
Tray 2 (500-sheet) Width 148.0 mm (5.83 in) 297 mm (11.7 in)
Length 210.0 mm (8.26 in) 432 mm (17.0 in)
Trays 3-5 (500-sheet) Width 148 mm (5.8 in) 297 mm (11.7 in)
Length 210 mm (8.3 in) 432 mm (17.0 in)
Duplexing unit Width 174.0 mm (6.9 in) 320.0 mm (12.6 in)
Length 210.0 mm (8.3 in) 457 mm (18.0 in)
Paper source
The Paper source setting specifies the source tray to use for printing a document. The list of source
trays depends on the product accessories that are installed. Any optional source trays that are installed
through the Device Settings tab also appear here.
The Paper source drop-down menu can contain the following options, depending on what has been
installed on the product:
●
Automatically select
●
Printer Auto Select
●
Manual Feed in Tray 1
●
Tray 1 (100-sheet multipurpose tray)
●
Tray 2 (500-sheet tray)
●
Tray 3 (500-sheet tray, HP Color LaserJet CP6015x and HP Color LaserJet CP6015xh only)
●
Tray 4 (500-sheet tray, HP Color LaserJet CP6015xh only)
●
Tray 5 (500-sheet tray, HP Color LaserJet CP6015xh only)
The default setting is Automatically Select. When this setting is selected, the HP Color LaserJet
CP6015 Series uses the source tray that supports the paper size that you have selected. If you select
a source tray other than Automatically select, make sure that the correct paper size is loaded in the
source tray. For information about paper sources, see the
Media attributes on page 336.
ENWW Paper/Quality tab features 231