Filter
Top Products
Help system
The HP PS Universal Print Driver and the PCL 5 Universal Print Driver include a full-featured Help
system to provide assistance with printing and configuration options.
What's this? Help
Windows 2000, Windows XP, Windows Server 2003, and Windows Vista support What's this? Help.
You can gain access to What's this? Help messages in any of the following ways:
●
Right-click a feature or control. A pop-up Help window appears.
●
Click the ? button in the upper-right corner of the frame, next to the X, to change the cursor to an
arrow with a question mark. When you use this special cursor to select a control, the pop-up Help
window for that feature appears.
●
Click a feature or control, and then press the F1 key. The Help window for the currently selected
control appears.
Options Cannot be Combined messages
Options Cannot be Combined (constraint) messages are unsolicited messages that appear in
response to specific print-driver selections. These messages alert you to selections that are illogical or
impossible given the product capabilities or the current settings of other controls.
NOTE: Constraint messages are limited, and the underlying software architecture might accept some
settings that are illogical or impossible for the product to perform. Sending a job with incompatible
settings can lead to unexpected results. If print jobs do not print as expected, check the product
documentation for the product capabilities.
In Windows 2000, Windows XP, Windows Server 2003, and Windows Vista operating environments,
some technically invalid print-driver configurations result in warning messages. Duplexing, for example,
is not possible when the Transparency paper type is selected. The following figure shows an Options
cannot be combined message.
Figure 5-1 An Options cannot be combined message
Click OK, then go to the Finishing tab to resolve the conflicting settings.
ENWW Help system 219