Filter
Top Products
Cartridge out override
What is it?
The HP Color LaserJet 2600n printer displays an Order supplies message when a cartridge
is running low and a Replace supplies message when a cartridge has been depleted. To
ensure optimal print quality, HP recommends replacing a cartridge when the Replace
supplies message is displayed. Replacing the cartridge at this point can help prevent
waste of media or other cartridges when one cartridge produces poor print quality.
The Cartridge Out Override feature allows the printer to continue using a cartridge that has
reached the recommended replacement point.
WARNING!
Using Override may result in unsatisfactory print quality and unavailability of certain features
(such as toner remaining information).
WARNING!
All print defects or supply failures incurred when an HP supply is used in Override will not be
considered defects in materials or workmanship in the supply under HP's Print Cartridge
Limited Warranty Statement. For Warranty information, see
Print Cartridge Limited Warranty
Statement.
Configuration
Cartridge Out Override can only be enabled from the printer's control panel menu.
1.
From the main menu, press
(R
IGHT
ARROW
) to System setup and press (S
ELECT
).
2.
Press
(R
IGHT
ARROW
) to Print quality and press (S
ELECT
).
3.
Press
(R
IGHT
ARROW
) to Replace supplies and press (S
ELECT
).
4.
Press
(R
IGHT
ARROW
) to Override out and press (S
ELECT
).
5.
Press
(S
ELECT
).
If Stop at out is selected, the printer will stop printing when a cartridge reaches the
recommended replacement point. If Override out is selected, the printer will continue
printing when a cartridge reaches the recommended replacement point. The factory default
setting is Stop at out.
On-going operation
Override can be enabled or disabled at any time, and does not have to be re-enabled for
each cartridge. The printer will automatically continue printing when a cartridge reaches
recommended replacement. The printer will display a message Replace supply Override in
use while a cartridge is used in Override mode. When the cartridge is replaced with a new
supply, Override will de-activate until another cartridge reaches recommended replacement.
94 Chapter 8 Maintenance ENWW