Filter
Top Products
Printing on letterhead or preprinted forms
This section shows how to orient letterhead or preprinted forms when you are printing only
on one side.
● Tray 1: Feed paper with the top edge first and the side to be printed face down as shown
in the following figure.
● Tray 2: Orient paper in with the with the side to be printed face up and the top edge
toward the front of the printer as shown in the following figure.
● Avoid using raised or embossed letterhead.
● Avoid using letterhead that is printed with low-temperature inks, such as those used in
some types of thermography.
● The printer uses heat and pressure to fuse toner to the print media. Make sure that any
colored paper or preprinted forms use inks that are compatible with this fusing
temperature (210°C (410°F) for 0.1 second).
Printing on HP LaserJet Tough paper
When printing on HP LaserJet Tough paper, follow these guidelines:
● Handle HP LaserJet Tough paper by the edges. Oil from your fingers that is deposited
on HP LaserJet Tough paper can cause print-quality problems.
● Use HP LaserJet Tough paper only with this printer. HP products are designed to work
together for optimum printing results.
● In either the software program or the printer driver, select Tough Paper as the media
type, or print from a tray that is configured for HP LaserJet Tough paper.
For loading information, see
Printing on letterhead or preprinted forms.
50 Chapter 4 Printing tasks ENWW