Filter
Top Products
Cleaning the printer
During the printing process, paper, toner and dust particles can accumulate inside the
printer. Over time, this buildup can cause print-quality problems such as toner specks or
smearing. This printer has a cleaning mode that can correct and prevent these types of
problems.
To clean the fuser using HP Toolbox
NOTE
Use the following procedure to clean the fuser using the HP Toolbox. To clean the engine
when the computer is running an operating system that does not support HP Toolbox, see
the late-breaking Readme on the root of the CD-ROM, or visit http://www.hp.com/support/
clj2600n.
1. Make sure that the printer is turned on and in the Ready state.
2. Open the HP Toolbox.
3. On the Troubleshooting tab, click Maintenance, click Cleaning Page and then click
Print. A page with a pattern prints from the printer.
4. At the printer, remove any print media in Tray 2 or optional Tray 3.
5. Remove the page that printed and load it face-down into Tray 2 or optional Tray 3.
6. At the computer, press Clean.
ENWW Cleaning the printer 95