Filter
Top Products
Print-media specifications
This section contains information about specifications for the quality of print media,
guidelines for print media usage, and guidelines for print media storage.
General guidelines
Some print media might meet all of the guidelines in this manual and still not produce
satisfactory results. This problem might be the result of improper handling, unacceptable
temperature and humidity levels, or other variables over which Hewlett-Packard has no
control.
Before purchasing large quantities of print media, always test a sample and make sure that
the print media meets the requirements specified in this user guide and in the HP LaserJet
Printer Family Print Media Guide. For ordering information, see
Accessories and ordering
information.
CAUTION
Using print media that does not meet HP specifications can cause problems for the printer,
requiring repair. This repair is not covered by the Hewlett-Packard warranty or service
agreements.
CAUTION
Use only paper designed for laser printers. Paper for inkjet printers may damage the printer.
This printer accepts a variety of media, such as cut-sheet paper (including up to 100%
recycled-fiber-content paper), envelopes, labels, transparencies, HP LaserJet glossy paper,
HP LaserJet Tough paper, HP LaserJet Photo paper, and custom-size paper. Properties
such as weight, composition, grain, and moisture content are important factors that affect
printer performance and output quality. Print media that does not meet the guidelines
outlined in this manual can cause the following problems:
● Poor print quality
● Increased jams
● Premature wear on the printer, requiring repair
Paper and print media
Category Specifications
Acid content 5.5 pH to 8.0 pH
Caliper 0.094 to 0.18 mm (3.0 to 7.0 mils)
Curl in ream Flat within 5 mm (0.02 in.)
Cut-edge conditions Cut with sharp blades with no visible fray
Fusing compatibility Must not scorch, melt, offset, or release
hazardous emissions when heated to 210°C
(410°F) for 0.1 second
Grain Long Grain
Moisture content 4% to 6% by weight
ENWW Print-media specifications 13