Filter
Top Products
To clean the paper path
1.
Use the
(L
EFT
ARROW
) or the (R
IGHT
ARROW
) button to select Service, and then press
(S
ELECT
).
2.
Use the
(L
EFT
ARROW
) or the (R
IGHT
ARROW
) button to select Cleaning Mode, and
then press
(S
ELECT
).
A page feeds through the printer slowly. Discard the page when the process is completed.
3. Load plain letter or A4 paper when you are prompted.
4.
Press
(S
ELECT
) again to confirm and begin the cleaning process.
A page feeds through the printer slowly. Discard the page when the process is completed.
Calibrating the printer
Calibrations are performed at regular intervals. For best print quality, a calibration can be
performed from the control panel using the following steps:
1.
Use the
(L
EFT
ARROW
) or the (R
IGHT
ARROW
) button to select System setup and then
press
(S
ELECT
).
2.
Use the
(L
EFT
ARROW
) or the (R
IGHT
ARROW
) button to select Print quality and then
press
(S
ELECT
). Calibrate color will display on the control panel.
3.
Press
(S
ELECT
).
4.
Use the
(L
EFT
ARROW
) or the (R
IGHT
ARROW
) button to select Calibrate now and then
press
(S
ELECT
).
5.
Press
(S
ELECT
) to start the calibration.
122 Chapter 9 Problem solving ENWW