Filter
Top Products
Dual fan mount assembly with cable
Before you begin:
v Read “Safety information” on page 127
v Review the information in “Before you begin” on page 50
Note: To remove the fan housing assembly with card guides (for four fans), see
step 4 on page 57
8 8
1 Holding screws
2 Dual fan mount assembly
To remove the dual fan mount assembly with cable, do the following:
1. Power-off the server, if it is on.
2. Unplug the server.
3. Remove the top cover (see “Removing the server top cover and bezel” on
page 53).
4. Disconnect the dual fan mount cable.
5. Remove the two holding screws.
6. Gently lift the fan mount assembly out of the server.
FRU information (service only) 91