Filter
Top Products
v Remove items from your shirt pocket (such as pens or pencils) that could fall into
the server as you lean over it.
v Avoid dropping any metallic objects, such as paper clips, hair pins, or screws,
into the server.
Handling static-sensitive devices
Static electricity, though harmless to you, can seriously damage server components
or options.
Note: When you are adding an internal option, do not open the static-protective
package containing the option until you are instructed to do so.
When you handle options and other server components, take these precautions to
avoid damage from static electricity:
v Limit your movement. Movement can cause static electricity to build up around
you.
v Always handle components carefully. Handle adapters, the memory board, and
memory modules (DIMMs) by the edges. Never touch any exposed circuitry.
v Prevent others from touching components.
v When you are installing a new option, touch the static-protective package
containing the option to a metal expansion-slot screw or other unpainted metal
surface on the server for at least two seconds. (This reduces static electricity
from the package and from your body.)
v When possible, remove the option and install it directly into the server without
setting the option down. When this is not possible, place the static-protective
package that the option comes in on a smooth, level surface and place the
option on it.
v Do not place the option on the server’s covers or any metal surface.
Statement 1
DANGER
Electrical current from power, telephone and communication cables is hazardous.
To avoid a shock hazard:
v Do not connect or disconnect any cables or perform installation, maintenance, or
reconfiguration of this product during an electrical storm.
v Connect all power cords to a properly wired and grounded electrical outlet.
v Connect to properly wired outlets any equipment that will be attached to this
product.
v When possible, use one hand only to connect or disconnect signal cables.
v Never turn on any equipment when there is evidence of fire, water, or structural
damage.
v Disconnect the attached power cords, telecommunications systems, networks, and
modems before you open the device covers, unless instructed otherwise in the
installation and configuration procedures.
v Connect and disconnect cables as described in the following table when installing,
moving, or opening covers on this product or attached devices.
Installing options 51