Filter
Top Products
Service processor card assembly
Before you begin:
v Read “Safety information” on page 127
v Review the information in “Before you begin” on page 50
8 8
1 Holding screws
2 Service processor card assembly
To remove the service processor card assembly, do the following:
1. Power-off the server, if it is on.
2. Unplug the server.
3. Remove the top cover (see “Removing the server top cover and bezel” on
page 53).
4. Remove the dual fan mount assembly (see “Dual fan mount assembly with
cable” on page 91).
5. Remove the two holding screws.
6. Gently lift the service processor card away from the system board and out of
the server.
92 IBM xSeries 350 Type 8682: Hardware Maintenance Manual