Filter
Top Products
Attention: When you route the SCSI cable, observe the following:
v Do not block the ventilated space in front of the fan assembly.
v Do not place the SCSI cable fold on top of the fan assembly.
v Do not route the SCSI cable over the memory board assembly.
CPU
Memory
Fan
A B C D
1 2 3 4
DASD
NMI
SP Bus
Event Log
Non Red
Over Spec
Te mp
PCI
Bus
Powe r
Supply
ServeRAID adapter
11. Install the ServeRAID adapter in the desired PCI slot. See “Installing a hot-plug
adapter” on page 55 for adapter installation instructions. Refer to the
ServeRAID adapter option documentation for additional information on
installing a ServeRAID adapter in the server and connecting the SCSI cable to
a ServeRAID adapter.
12. Connect the SCSI cable to an internal channel connector on the ServeRAID
adapter.
Note: Refer to the Using IBM ServeRAID book on the Documentation CD for
information on ServeRAID adapters and controllers.
58 IBM xSeries 350 Type 8682: Hardware Maintenance Manual