Filter
Top Products
General information
The IBM xSeries 350 server is a high-performance server with the capability of
microprocessor upgrade to a symmetric multiprocessing (SMP) server. It is ideally
suited for networking environments that require superior microprocessor
performance, efficient memory management, flexibility, and large amounts of reliable
data storage.
Performance, ease of use, reliability, and expansion capabilities were key
considerations during the design of the server. These design features make it
possible for you to customize the system hardware to meet your needs today, while
providing flexible expansion capabilities for the future.
The xSeries 350 server comes with a three-year limited warranty and 90-Day IBM
Start Up Support. If you have access to the World Wide Web, you can obtain
up-to-date information about the server model and other IBM server products at the
following World Wide Web address: http://www.ibm.com/eserver/xseries/
Features and specifications
The following provides a summary of the features and specifications for the xSeries
350 server.
v Microprocessor:
– Intel Pentium III Xeon
– 32 KB of level-1 cache
– 1 MB or 2 MB Level-2 cache depending upon model
– 100 MHz front-side bus (FSB)
– Supports up to four microprocessors
v Memory:
– Maximum: 16GB
– Type: ECC, SDRAM, Registered DIMMs
– 16 slots, 4-way interleaved
v Drives standard:
– Diskette: 1.44 MB
– CD-ROM: 40X IDE
v Expansion bays:
Hot-swap drives: Three standard slim-high, three optional slim-high
v Active PCI expansion slots:
– One 33 MHz/32-bit
– Three 66 MHz/64-bit
– Two 33 MHz/64-bit
v Hot-swap power supplies:
270 W (115-230 V ac)
– Minimum: One
– Maximum: Three
v Redundant cooling:
– Six hot-swap fans
v Video:
– S3 video controller
– Compatible with SVGA and VGA
– 8 MB video memory
© Copyright IBM Corp. 2000 3