Muratec F-65 Fax Machine User Manual


 
The drawing below shows what should be included in the packaging:
* These parts are installed in the fax machine.
** This ferrite core will be used with an RS-232C cable if you decide to use the
PC
-
FAX
feature (see page 2.50). The RS-232C cable is not included with this fax
machine.
Your fax machine comes with a pre-installed starter roll of ink film, which your
machine uses to print received faxes and copies. This starter roll is only
1
/
10
the size
of a normal roll. Please obtain a full-size replacement roll from your authorized
Muratec dealer.
For the best results and longest life from your fax machine, please use only Muratec-
brand Ink Film, which is designed specifically for your model.
Save the packing materials for reshipment.
1
Document hopper — Supports the original document for straighter feeding
into the automatic document feeder (
ADF
).
2
Automatic document feeder (
ADF
) — Place your original document for fax-
ing or copying in this slot. It holds up to 30 letter-sized pages.
3
Liquid crystal display (
LCD
) — This display (1-line × 16-character) shows
the machine’s status. It also shows you the fax numbers any any other infor-
mation you enter into the machine.
4
Control panel — Use these keys to operate your machine. (See page 1.4 for
more details.)
5
Original document exit — Where the original document (what you put into
the
ADF
for faxing or copying) comes out.
1
2
3
4
5
6
7
8
9
10
12
11
Handset
AC power cord
Telephone line cord
Operating instructions
Document separator
Paper cassette
*
Paper tary
Ferrite core
**
Document hopper
Ink film cartridge
*
1.2
Getting started
Take it out of the packaging
What are all the parts?