Filter
Top Products
8
Instruct your fax to carry out this delayed command in one of the following
ways:
Option 1: Perform the command once at a certain time on a certain day of
the month. (For example, “Do this at 5:05
PM
on the 30th.”)
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Option 2: Perform the command at a certain time each day you press the
key. (For example, “Do this at 5:05
PM
today.”)
To select this option, use the numeric keypad to enter 0, 0 (i. e.,
00), and then the time when the fax could perform the command:
9
Press
ENTER
,
ENTER
.
10
The
LCD
now displays the next programmable one-touch key.
If you do not want to enter or change any other key’s programming, press
STOP
to return your machine to its usual standby mode.
If you do want to enter or change this key’s programming, go back to step 4.
Programming a relay broadcast initiation
Note: To erase a programmable one-touch key, refer to page 2.36.
Note: For this operation to work, three things must be true:
• The remote fax machine must be a Muratec fax machine with “hub”
capability.
• The call group(s) to which you are faxing must exist on the remote
machine.
• You must know the two-digit number for each call group that you are
faxing.
To program a relay broadcast initiation into a programmable one-touch key:
1
Press
PROGRAM
,
C
, 1. The
LCD
shows:
2
Press
ENTER
. The
LCD
either shows:
… or indicates a command is already programmed into this key.
If
P
1 is the key you want to program, skip to step 4. (However, our examples
from here will say “P3” rather than “P1.”)
3
Select the key in which you want to program a command or change a previ-
ously stored command and then press it. Here, we select P3.
4
If you decide to select a different programmable one-touch key, go back to
step 3 before going on to step 5.
5
Press
ENTER
. The
LCD
now shows briefly:
then it will show either:
or
6
Use the numeric keypad to enter the “hub” machine’s number exactly as your
machine should dial it, including whatever codes your phone system requires.
The number can be up to 40 characters in length:
Your display can show only 16 characters at a time. To view characters beyond
those 16, press to scroll to the left or to scroll to the right.
Important: Do not press
ENTER
.
Note: If you make a mistake or want to erase previously entered numbers,
press
CANCEL
to erase to the left. Or to change just one character in
the number, press to move the cursor to the left, or to move it to
the right, to that character. Press
CANCEL
to erase it. Then re-enter
until the number is just as you want it.
7
Now, while you can still see the fax number on the
LCD
, press
COM
-
OPTIONS
three times. The
LCD
shows:
8
Press
ENTER
. The
LCD
shows:
Group No. _
3.Relay Tx
9-555-0629_
9-555-8743__
P3:Fax Number
P3:No Number
P1:No Number
Enter P OneTouch
Time : 00/17:05
Time : 30/17:05
Beyond the basics
2.30