Filter
Top Products
Corrective cleaning
Here are some simple cleaning procedures for keeping your fax machine clean and
operating smoothly.
Before you clean your fax machine, print all document received in the memory.
Cleaning your fax machine
1
Unplug the power cord of your machine from the power source.
2
Moisten a soft cloth with water and a small amount of diluted mild detergent.
Important: To prevent damage to the surface of your fax machine, never use thin-
ner, benzene, alcohol, acetone, or any other organic solvent to clean
your machine.
Curing frequent jams in the document feeder
If you are having trouble getting your original documents to feed properly, try this:
1
Get two soft, lint-free cloths and moisten them as follows:
• One with a cleaner suitable for use on rubber rollers
• The other with isopropyl alcohol
2
Unplug the power cord of your machine from the power source.
Remove the document hopper, if necessary.
3
Open the control panel by placing your fingers on its upper left and right cor-
ners and gently tilting the control panel toward you until it stops.
4
Use the cloth with the rollers
cleaner to clean the face of the
rollers and separator pad.
Rotate the rollers by hand to
allow cleaning of the entire
roller surface.
5
Use the cloth with the iso-
propyl alcohol to clean the
contact glass.
6
Gently close the control panel, making sure both sides are snapped down
securely.
7
Plug the power cord of your fax machine at the power source.
Attach the document hopper if you removed it in step 2.
Just in case …
3.9