Filter
Top Products
Beyond the basics
The EasyStart feature guided you through the “just-gotta” settings on your machine.
In the next few pages, we will cover other settings in more detail.
Setting up for scans
You can set parameters for how your fax machine scans documents:
• Primary resolution mode — Gives you four ways to send faxes, either — nor-
mal, fine or superfine resolutions — or in grayscale mode.
• Primary contrast mode — Sets how light or dark you want faxed documents
to be when they arrive at their destinations.
1
Press
PROGRAM
,
J
, 0, 1. The
LCD
shows:
2
Press
ENTER
. The
LCD
asks which resolution you select:
If the setting you see is acceptable, skip to step 4.
If not, go on to step 3.
3
To change the setting, press or repeatedly until the mode you want
appears. In this example, we have chosen fine resolution.
4
Press
ENTER
to save the setting. The
LCD
asks which contrast setting you select:
If the setting you see is acceptable, skip to step 6.
If not, go on to step 5.
5
To change the setting, press or repeatedly until the setting you want
appears. In this example, we have chosen light contrast.
6
Press
ENTER
to save the setting.
This section determines the resolution and contrast settings your fax will display
when you insert a document for transmission. If you choose “superfine” and “dark”
in steps 3 and 5, for example, these are the resolution and contrast settings you’ll
see the next time you put a document in the document feeder.
You can always change the resolution and contrast temporarily before sending.
To adjust the resolution and contrast:
• Press
RESOLUTION
to change the resolution.
• Press
CONTRAST
to change the contrast.
Contrast: Light
Contrast: Normal
Primary: Fine
Primary: Normal
Scan Parameters
Getting everything just the way you want it
2.2