Filter
Top Products
Beyond the basics
2.6
Setting the language
While English is the language which your machine initially uses to display messages
and print reports, you can set it to “speak” French or Spanish, too!
To make the change from one language to the next, press
PROGRAM
, #.
¿Qué es? — or, What is it?
If you aren’t sure which language is showing after you’ve made a language change,
press
PROGRAM
once and decide based on what appears on the
LCD
:
is French.
is Spanish.
If the language you see is the one you want, press
STOP
to return to standby mode.
If you want to change languages, press
STOP
to return to standby mode and then
press
PROGRAM
, # to go to the next language in the cycle.
Printing your settings
After you enter your settings, print a settings list.
With this list, you can quickly check all the settings without having to check them
on the machine.
Note: Please refer to the index at the end of these instructions to locate any set-
ting you do not recognize or understand.
To print the settings list, press
PROGRAM
,
J
, 2, 1,
ENTER
.
Printing a program list
Your machine can also print a program list. This list gives a brief summary of
instructions available on your fax machine, organized in a “program tree” so you
can see which key combinations produce which instructions.
Note: Please refer to the index at the end of these instructions to locate any set-
ting you do not recognize or understand.
To print a program list, press
PROGRAM
,
*
, 8. Your machine will print the list.
Núm. Una-Tecla
Num. Une-Touche