Filter
Top Products
8
The
LCD
now displays:
then it will show either:
or
The machine is now prompting you for a name — a Location
ID
— so you will
be able to find it easily in the EasyDial directory (see page 2.13).
If you don’t want to enter or change this number’s Location
ID
, skip to step 10.
If you do want to enter or change this number’s Location
ID
, go on to step 9.
9
A number’s Location
ID
may be up to 16 characters in length. You enter the
Location
ID
the same way you entered your fax name during EasyStart.
Let’s review the process.
On the
LCD
, you will see the char-
acter set currently available, such
as:
To find a different character,
press 2 or 8 over and over again to
scroll through character sets until
you see the one you want.
If you need to type in a space, one
can be found on each side of the
character set.
When you see the character you want:
• Press either 4 or 6 to move the cursor to the character you want.
• Then press 5 to enter that character and move on to the next entry.
Note: If you make a mistake, just press
CANCEL
to erase to the left. Then
continue to enter the character(s) you want.
Note: As you enter characters, the
LCD
will scroll to the left so you can view
entries longer than five characters.
10
Press
ENTER
to save the setting.
The
LCD
will display the next speed-dial number.
If you don’t want to enter any more speed-dial numbers, press
STOP
to finish.
If you do want to enter another speed-dial number, go back to step 3.
If you do want to enter this speed-dial number, go back to step 5.
Fax dialing via speed-dial
To dial a fax call using a speed-dial number:
1
Insert the document.
2
Adjust resolution and contrast if necessary.
3
Press
SPEED DIAL
/
TEL INDEX
once. The
LCD
shows:
4
Use the numeric keypad to enter the two-digit identifier (such as 05, in this
example) for the speed-dial number you want to dial. You will see a brief
Location
ID
then the speed-dial number:
Note: If the speed-dial number does not have a Location
ID
, only the number
appears.
5
Press
START
.
The machine handles the call from here. What happens next will depend upon
whether you specified transmission from memory or transmission from the feeder
(To review memory transmission, see page 1.17):
If you specified transmission from memory:
• Your fax machine scans your document into memory first, then dials the other
fax machine.
• When the other machine answers, your fax will transmit the document directly
from memory.
If you specified transmission from the feeder:
• Your fax machine dials the other fax machine.
• When the other machine answers, your fax feeds the document through its scan-
ner, transmitting as it goes.
6
At the end of the operation, your fax machine beeps and displays:
** Completed **
S05_
Muratec Office
S_
_ABCDEF >
_ABCDEF > Murat_ABCDEF >
05:Name
Beyond the basics
2.11