Filter
Top Products
Beyond the basics
2.27
6
Press
ENTER
. The
LCD
shows briefly:
then it will show:
7
Enter the fax number either by pressing a one-touch key, entering a speed-
dial number or dialing from the numeric keypad. Do not press
START
.
8
What you do now depends upon when you want the transmission to begin.
• To have it begin now, skip to step 11.
• To delay it, proceed to step 9.
9
Press
COM
-
OPTIONS
,
COM
-
OPTIONS
,
ENTER
.
The
LCD
shows the current day and time:
10
Use the numeric keypad to enter the day and time when the transmission
should begin, then press
ENTER
.
Note: If you make a mistake, press to move the cursor to the left, or to
move it to the right, to that character. Then re-enter until the number
is just as you want it.
11
Press
START
.
If you chose an immediate transmission in step 8, your fax machine will begin
dialing. If you chose a delayed command, the machine will display
“
**
Reserved
**
” on the
LCD
, indicating that the machine has stored the
command in memory and will perform it later.
Note: The
ITU
-
T
subaddress and password can be up to 20 characters in length and
can include any combination of numbers and the
*
and # symbols. Do not
include other non-numerical characters).
Note: To change a number you have already entered:
— Press to move the cursor to the left or to move it to the right, to
that character.
— Press
CANCEL
to erase the character.
— Enter the digit(s) you want.
Time : 15/17:05
_
Enter Fax Number