Filter
Top Products
ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
Content Filtering and Optimizing Scans 4-41
v1.0, September 2009
3. Complete the fields and select the checkbox as explained in Table 4-14.
4. Click Apply to save your settings.
Configuring FTP Scans
Some malware threats are specifically developed to spread through the FTP protocol. By default,
the STM scans FTP traffic, but you can specify how the STM scans FTP traffic and which action is
taken when a malware threat is detected.
To configure the FTP scan settings:
1. Select Web Security > FTP from the menu. The FTP screen displays (see Figure 4-19 on
page 4-42).
Table 4-14. Trusted Hosts Settings
Setting Description
Do Not Intercept HTTPS Connections for the following Hosts
Enable Select this checkbox to bypass scanning of trusted hosts that are listed in the
Hosts field. Users do not receive a security alert for trusted hosts that are listed
in the Host field.
Hosts This field contains the trusted hosts for which scanning is bypassed. To add a
host to this field, use the Add Host field or the Import from File tool (see below).
You can add a maximum of 200 URLs.
delete To delete one or more hosts, highlight the hosts, and click the
delete table button.
export To export the hosts, click the export table button and follow the
instructions of your browser.
Add Host Type or copy a trusted host in the Add Host field. Then, click the add table
button to add the host to the Host field.
Import from File To import a list with trusted hosts into the Host field, click the Browse button
and navigate to a file in .txt format that contains line-delimited hosts (that is,
one host per line). Then, click the upload table button to add the hosts to the
Host field.
Note: Any existing hosts in the Host field are overwritten when you import a list
of hosts from a file.
Note: The STM does not scan password-protected FTP files.