Filter
Top Products
ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
6-40 Monitoring System Access and Performance
v1.0, September 2009
2. Select the start date and time from the Begin Date/Time pull-down menus.
3. Specify the recipient’s e-mail address in the Send to field.
4. Click Send Report.
Using Diagnostics Utilities
The STM provides diagnostic tools that help you analyze traffic conditions and the status of the
network. Two sets of tools are available:
• Network diagnostic tools. These tools include a ping utility, traceroute utility, and DNS
lookup utility.
• Traffic diagnostic tools. These tools allow you to perform real-time, per-protocol traffic
analysis between specific source and destination addresses and let you generate reports on
network usage in your network.
To display the Diagnostics screen, select Monitoring > Diagnostics from the menu. To facilitate
the explanation of the tools, the Diagnostics screen is divided and presented in this manual in three
figures (Figure 6-20 on page 6-41, Figure 6-21 on page 6-42, and Figure 6-22 on page 6-43).
Note: The report includes only quarantined spam e-mails that contain the e-mail
address that is specified in the Send to field.
Note: The report provides summary information such as time, sender, recipient,
subject, and size, and a retrieve link. The user can retrieve an individual
e-mail by clicking the retrieve link for the e-mail.
Note: For normal operation, diagnostic tools are not required.