Filter
Top Products
ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
Monitoring System Access and Performance 6-21
v1.0, September 2009
Table 6-8. System Status Information
Setting Description
System Information
Firmware Information The current version and most recent update (that is, the most recently
downloaded version) for the software, scan engine, pattern file, and operating
system (OS).
Hardware Serial Number The hardware serial number of the STM.
License Expiration Date The license keys and the expiration dates for the e-mail protection, Web
protection, and maintenance and support licenses.
Note: When a license has expired, the license expiration date is displayed in red
font.
When a license expires, a LED (see below) on the front panel of the STM blinks
continuously to remind you to renew the license. To stop the blinking of the LED,
click Stop LED Blinking.
On the STM150: The Test LED blinks when a license expires.
On the STM300 and STM600: The Status LED blinks when a license expires.
Management Interface Information
System Name
These fields are self-explanatory. You can configure these fields on the Network
Settings screen (see “Configuring Network Settings” on page 3-1).
IP Address
Subnet Mask
Gateway IP Address
Primary DNS
Secondary DNS
Interfaces
The MAC addresses of the STM’s interfaces. (Figure 6-10 on page 6-20 displays the System Status screen
for the STM600.)
STM600: MGMT (Management), PAIR1 DOWNLINK, PAIR1 UPLINK, PAIR2 DOWNLINK, PAIR2 UPLINK.
STM300: MGMT, DOWNLINK, UPLINK.
STM150: LAN, WAN. (The four LAN interfaces share a single MAC address.)