Filter
Top Products
ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
1-14 Introduction
v1.0, September 2009
Rear Panel Features
The rear panel of the STM150 differs from the rear panels of the STM300 and STM600.
Rear Panel STM150
Figure 1-5 shows the rear panel components of the STM150.
From left to right, the STM150’s rear panel components are:
1. Console port. Port for connecting to an optional console terminal. The ports has a DB9 male
connector. The default baud rate is 9600 K. The pinouts are: (2) Tx, (3) Rx, (5) and (7) Gnd.
2. Kensington lock. Attach an optional Kensington lock to prevent unauthorized removal of the
STM150.
3. Power Button. Press to restart the STM150. Restarting does not reset the STM150 to its
factory defaults.
4. Reset Button. Using a sharp object, press and hold this button for about 10 seconds until the
front panel Test light flashes and the STM150 returns to factory default settings.
5. AC power socket. Attach the power cord to this socket.
Figure 1-5
Note: If you reset the STM150, all configuration settings are lost and the default
passwords are restored.
1) Console Port
2) Lock
3) Power Button
4) Reset Button
5) AC Power Socket