Filter
Top Products
ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
1-10 Introduction
v1.0, September 2009
Front Panel STM300
Figure 1-3 shows the front panel ports and LEDs of the STM300.
From left to right, the STM300’s front panel shows the following ports and LEDs:
1. Console port. Port for connecting to an optional console terminal. The ports has a DB9 male
connector. The default baud rate is 9600 K. The pinouts are: (2) Tx, (3) Rx, (5) and (7) Gnd.
2. Power LED.
3. Status LED.
4. Hard drive (HDD) LED.
5. One non-functioning USB port: this port is included for future management enhancements.
The port is currently not operable on any STM model.
6. Dedicated management (Mgmt) Gigabit Ethernet port with an RJ-45 connector.
7. One uplink (WAN) Gigabit Ethernet port with an RJ-45 connector, left LED, and right LED.
8. One downlink (LAN) Gigabit Ethernet port with RJ-45 connectors, left LEDs, and right LED.
Figure 1-3
Note: All Gigabit Ethernet ports provide switched N-way, automatic speed-negotiating,
auto MDI/MDIX technology.
3) Status LED
4) HDD LED
5) USB Port
7) Uplink Port
8) Downlink Port
7) Uplink LEDs
8) Downlink LEDs
2) Power LED
1) Console Port
6) Mgmt Port