Filter
Top Products
ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
6-8 Monitoring System Access and Performance
v1.0, September 2009
2. Locate the Clear the Following Log Information section at the bottom of the screen.
3. Select the checkboxes to specify which logs are cleared:
• System. The system event logs are cleared.
• Traffic. The logs with scanned incoming and outgoing traffic are cleared.
• Malware. The logs with intercepted viruses and spyware are cleared.
• Spam. The logs with intercepted spam are cleared.
• Content filter. The logs with intercepted Web sites, URLs, and FTP sites are cleared.
• Email filter. The logs with intercepted e-mails are cleared.
• Application. The logs with intercepted applications are cleared.
4. Click Clear Log Information.
Configuring Alerts
You can configure the STM to send an e-mail alert when a failure, license expiration, or malware
attack or outbreak occurs. Four types of alerts are supported:
• Update Failure Alert. Sent when an attempt to update any component such as a pattern file or
scan engine firmware fails.
• License Expiration Alerts. Sent when when a license is about to expire and then again when
a license has expired.
• Malware Alert. Sent when the STM detects malware threats.
• Malware Outbreak Alert. Sent when the malware outbreak criteria that you have configured
are reached or exceeded. Outbreak criteria are based on the number of malware threats
detected within a specified period of time.
Figure 6-4 [Email and Syslog, screen 3 of 3]