Filter
Top Products
ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
2-10 Using the Setup Wizard to Provision the STM in Your Network
v1.0, September 2009
Using the Setup Wizard to Perform the Initial Configuration
The Setup Wizard facilitates the initial configuration of the STM by taking you through
11 screens, the last of which allows you to save the configuration.
To start the Setup Wizard:
1. Select Global Settings > Network Settings from the main navigation menu. The Network
Settings submenu tabs appear with the Network Settings screen in view.
2. From the Global Setting configuration menu, select Setup Wizard.
The following sections explain the 11 configuration screens of the Setup Wizard. On the 10th
screen, you can save your configuration. The 11th screen is just an informational screen.
The tables in the following sections explain the buttons and fields of the Setup Wizard screens.
Additional information about the settings in the Setup Wizard screens is provided in other chapters
that explain manual configuration; each section below provides a specific link to a section in
another chapters.
Setup Wizard Step 1 of 10: Introduction
The first Setup Wizard screen is just an introductory screen Click Next to go to the following
screen.
Figure 2-10