Filter
Top Products
ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
5-6 Managing Users, Groups, and Authentication
v1.0, September 2009
2. In the Add New IP Subnets/Groups section of the screen, complete the fields as explained in
Table 5-3.
3. Click the add table button. The new group is added to the Groups Membership by IP Address
table.
To delete a group from the List of Groups table, click the delete table button in the Action column
for the group that you want to delete.
Configuring User Accounts
When you create a user account, you can assign the user to a local group. Therefore, you should
first create any local groups, then user accounts. User accounts are added to the STM’s local user
database.
Creating and Deleting User Accounts
To create an individual user account:
1. Select Users > Users from the menu. The Users screen displays (Figure 5-4 on page 5-7
contains some examples).
Table 5-3. IP Subnet/Group Settings
Setting Description
IP Address An IP address on your local network or on a remote device to which the users are
assigned.
Netmask The subnet mask to which the users are assigned. For an individual IP address,
specify 255.255.255.255.
Name A descriptive (alphanumeric) name of the group for identification and management
purposes.
Note: When you delete a group, an exception rule that might be associated with this
group no longer has any effect. You can delete such an exception rule.