Filter
Top Products
ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
Performing Network and System Management 3-27
v1.0, September 2009
The top part of the Certificate Used for HTTPS Scans section displays information about the
current certificate that is used for HTTPS scans
Downloading the Certificate in to Your Browser
To download the current certificate in to your browser:
1. Click Download for browser Import.
2. Follow the instructions of your browser to save the RootCA.crt file on your computer.
Reloading the Default NETGEAR Certificate
To reload the default NETGEAR certificate:
1. Select the Use NETGEAR default certificate. radio button.
2. Click Apply to save your settings.
Importing a New Certificate
To import a new certificate:
1. Select the Use imported certificate (PKCS12 format) radio button.
2. Click Browse next to the Import from File field.
3. Navigate to a trusted certificate file on your computer. Follow the instructions of your browser
to place the certificate file in the Import from File field.
4. If required, enter the appropriate password in the Certificate password field.
5. Click the upload button.
6. Click Apply to save your settings.
Note: For information about the HTTPS scanning process, “HTTPS Scan Settings” on
page 4-36.
Note: If the certificate file is not in the pkcs12 format, the upload fails. Importing a
new certificate overwrites any previously imported certificates.