Filter
Top Products
ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
5-24 Managing Users, Groups, and Authentication
v1.0, September 2009
Global User Settings
You can globally set the user session settings for authenticated users. These settings include the
session expiration period, the allowed session idle time, and the default domain that is presented to
the users. To specify the global user configuration settings:
1. Select User Management > Configuration from the menu. The Configuration screen
displays.
2. Locate the Sessions Parameters section on screen, and specify the session settings:
• Session Expiration Length. The period after which a session expires and a user must log
in again. This setting applies to all users. From the pull-down menu, select either Minutes
or Hours. Then, in the field to the left of the pull-down menu, enter a number for the
minutes or hours. The session expiration length cannot exceed the idle time period.
• Idle Time. The period after which an idle connection is terminated and a user musts log in
again. This setting applies to all users. From the pull-down menu, select either Minutes or
Hours. Then, in the field to the left of the pull-down menu, enter a number for the minutes
or hours. The idle time period cannot exceed the session expiration length.
Figure 5-17
Note: To set the time-out period for the Web Management Interface, see
“Changing Administrative Passwords and Timeouts” on page 3-9.