Filter
Top Products
ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
2-20 Using the Setup Wizard to Provision the STM in Your Network
v1.0, September 2009
Enter the settings as explained in Table 2-5 on page 2-20, then click Next to go the following
screen.
Note: After you have completed the steps in the Setup Wizard, you can make changes to
the administrator e-mail notification settings by selecting Global Settings > Email
Notification server. For more information about these settings, see “Configuring
the E-mail Notification Server” on page 6-2.
Table 2-5. Setup Wizard Step 6: Email Notification Server Settings
Setting Description (or Subfield and Description)
Email Notification Server Settings
Show as Mail sender A descriptive name of the sender for e-mail identification purposes. For
example, enter stm600notification@netgear.com.
Send Notifications to The e-mail address to which the notifications should be sent. Typically, this is
the e-mail address of a user with administrative privileges.
SMTP server The IP address and port number or Internet name and port number of your
ISP’s outgoing e-mail SMTP server. The default port number is 25.
Note: If you leave this field blank, the STM cannot send e-mail notifications.
Mail Server Requires
Authentication
If the SMTP server requires authentication, select the Mail Server Requires
Authentication checkbox and enter the following settings:
User Name The user name for SMTP server authentication.
Password The password for SMTP server authentication.