Filter
Top Products
100 WLAN IP Telephony Manager 2245 configuration
If the WLAN IP Telephony Manager 2245 is in Maintenance
Lock, a prompt appears asking if the configuration is to be
saved.
2 Enter Y.
3 Alternatively, select the Reset option found in the SVP-II
Configuration screen. Press Esc. See “Configure the WLAN IP
Telephony Manager 2245” (page 100).
--End--
Configure the WLAN IP Telephony Manager 2245
The WLAN IP Telephony Manager 2245 is configured on the SVP-II
Configuration screen where the mode of the WLAN IP Telephony
Manager 2245 is configured. This screen is also used to lock the WLAN
IP Telephony Manager 2245 for maintenance and reset the WLAN IP
Telephony Manager 2245 after maintenance.
The WLAN IP Telephony Manager 2245 automatically locks for
maintenance if the IP address is changed. When a Maintenance Lock
occurs, the WLAN IP Telephony Manager 2245 must be reset upon exit.
All active calls are terminated during a reset.
Access the SVP-II Configuration screen from the NetLink SVP-II System
menu. Scroll to SVP-II Configuration and press Enter.
Perform the desired SVP-II configuration.
• Phones per Access Point—enter the number of simultaneous
calls supported for the AP type. AP specifications are described in
“Compatible Access Points” (page 215).
•
802.11 Rate—select Automatic to allow the wireless handset to
determine its rate (up to 11Mbs). Select 1MB/2MB to limit the
transmission rate between the wireless handsets and APs.
•
First Alias IP Address and Last Alias IP Address—enter the range
of IP addresses that this WLAN IP Telephony Manager 2245 can use
when acting as a proxy for the wireless handsets.
If you install multiple WLAN IP Telephony Manager 2245 units, you
must configure a different range of IP addresses for each WLAN IP
Telephony Manager 2245. Use the following formula to determine how
many addresses to configure for each WLAN IP Telephony Manager
2245:
(number of handsets / number of WLAN IP Telephony Manager 2245
units) + 30%
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 03.04 Standard
23 September 2008
Copyright © 2004–2008 Nortel Networks
.