Filter
Top Products
Dropped calls 127
Table 16
Wireless handset status messages (cont’d.)
Message Description Action
No DHCP Server Handset is unable to contact the
DHCP server.
Check that DHCP is
operational and connected
to the WLAN or use Static IP
configuration in the handset.
No ESSID
(For the WLAN Handsets
2210/2211/ 2212 only.)
Attempted to run the site survey
application without an ESSID
configured.
Let the handset come
completely up. Statically
configure an ESSID in the
Admin menu.
No SSID
(For the WLAN Handsets
6120/6140 only.)
Attempted to run the site survey
application without an SSID
configured.
Let the handset come
completely up. Statically
configure an SSID in the
Admin menu.
No Func Code Handset software download files
are incorrect or corrupt.
Reconfigured the handset to
gain access to the WLAN and
download new code.
No Host IP (Addr) The wireless handset is
configured for static IP (as
opposed to use DHCP) and
no valid host IP address (the
wireless handset IP address) is
entered.
Enter a valid IP address in
the configuration settings or
change to use DHCP.
No IP Address Invalid IP address. Check the IP address of
the wireless handset and
reconfigure if required.
No Net Access Cannot authenticate or associate
with AP.
Verify the AP configuration.
Verify that all the WEP settings
in the handset match those in
the APs.
No Net Found This indicates any of the
following:
(For the WLAN Handsets
2210/2211/ 2212 only.)
• No radio link
Verify that the AP is turned on.
• No ESSID—Autolearn not
supported (or) incorrect
ESSID
Verify the ESSID of the
wireless LAN and enter or
Autolearn it again, if required.
• AP does not support
appropriate data ranges
Check the AP configuration
against the AP Configuration
Note.
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 03.04 Standard
23 September 2008
Copyright © 2004–2008 Nortel Networks
.