Filter
Top Products
150 WLAN Application Gateway 2246
• Ethernet Address—this is the MAC address of the WLAN
Application Gateway 2246. This address is set at the factory.
•
IP Address—enter the complete IP address for the WLAN
Application Gateway 2246, including digits and periods. Do
not use DHCP. The IP address can be changed after initial
configuration.
• Hostname—the default host name can be changed. This is
the name of the WLAN Application Gateway 2246 to which
connection is made. This name is for identification purposes
only. Spaces cannot be entered in this field.
•
Subnet Mask—Enter the subnet mask defined by the
network administrator.
•
Default Router—DHCP or static IP address.
•
Allow Telnet Connections—Enter Y (Yes) to allow
connection to the WLAN Application Gateway 2246 through
Telnet. Enter N (No) if no Telnet connection is allowed.
• Allow FTP Connections—Yes or No (NTTQ65xx models
only).
•
DNS server and DNS domain—these settings are used to
configure Domain Name Services (DNS). (These settings
can also be configured as DHCP. This causes the DHCP
client in the WLAN Application Gateway 2246 to attempt to
automatically obtain the correct configuration from the DHCP
server. The DHCP setting is only valid when the IP address
is also acquired using DHCP).
•
WINS servers—these settings are used for Windows
Internet Name Services (WINS). (These settings can also
be configured as DHCP. This causes the DHCP client in the
WLAN Application Gateway 2246 to attempt to automatically
obtain the correct setting from the DHCP server. The DHCP
setting is only valid when the IP address is also acquired
using DHCP.) When WINS is configured properly, the WLAN
Application Gateway 2246 can translate hostnames to IP
addresses. When using Telnet, it is also possible to access
the WLAN Application Gateway 2246 using its hostname
instead of the IP address.
• Logging—can be configured to Syslog or NONE.
• Log server—enter the IP address or hostname of the Syslog
Server on the network if Syslog is configured. The WLAN
Application Gateway 2246 writes Syslog format diagnostic
messages to the Syslog Server.
• SNTP server—can be configured as a hostname, IP address,
or NONE. The SNTP server is a Simple Network Time
server. The WLAN Application Gateway 2246 obtains the
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 03.04 Standard
23 September 2008
Copyright © 2004–2008 Nortel Networks
.