Nortel Networks 1000 Switch User Manual


 
WLAN specific configuration 175
Table 22
1230 connected with 2950 and 2245 connected with 2950 (cont’d.)
AP: 1230 2950 connected the APs 2950 connected to 2245
3
int fastethernet 0.240
encapsulation dot1Q
240 service-policy input
wireless- SVP-VoIP
int fastethernet 026 (the port that
is connected with the AP)
switchport trunk native vlan 11
switchport trunk allowed vlan 11,
240
switchport mode trunk
mls qos trust cos
int fastethernet 03 (the port that
connected with 2245)
switchport access vlan xx
switchport mode access
mls qos trust cos
mls qos cos 5
service-policy input trust-voice-2
245
4
(for return path) dot11
priority-map avvid
class-map match-all voice-sig
match access-group 100
5
access-list 100 permit udp
172.23.0.016 eq 5000
172.23.0.016
6
class-map match-all voice-bearer
match access-group 101
7
access-list 101 permit udp
172.23.0.016 eq 5200
172.23.0.016
8
policy-map trust -voice-2245
class voice-sig
set ip dscp 40
class voice-bearer
set ip dscp 46
Table 23 "1230 connected with 3560 and 2245 connected with 6509"
(page 175) provides the steps to configure the Cisco Aironet 1230
connected to the Cisco Catalyst 3560, and the Cisco Catalyst 6509
connected to the WLAN IP Telephony Manager 2245.
Table 23
1230 connected with 3560 and 2245 connected with 6509
AP:1230 3650 connected to APs 6509 connected to 2245
1
class-map match-all
class_SVP_VoIP match
ip protocol 119 (protocol
119 marked the value of
cos 5)
mls qos mls qos
2
Policy-map wirele
ss-SVP-VoIP class
class_SVP_VoIP
mls qos map cos-dscp 0 8 16 40
34 46 48 56
mls qos map cos-dscp 0 8 16 40
32 46 48 56
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 03.04 Standard
23 September 2008
Copyright © 2004–2008 Nortel Networks
.