Filter
Top Products
Software 161
The WLAN Application Gateway 2246 displays up to 16 telephone lines at
one time. Move to the next group of 16 lines by using the arrow keys.
Certification testing
The following sections provide information about certification testing.
WLAN Application Gateway 2246 certification
After the WLAN Application Gateway 2246 is properly connected to the
Application Server, LED 1 blinks.
Wireless handset certification
The procedure for certification of wireless handsets is different depending
on whether you are installing the WLAN Application Gateway 2246 on a
new system or an existing system.
WLAN Application Gateway 2246 installation on new system
If this is a new system installation, continue with handset registration
and Call Server programming. When the wireless handset installation is
complete, perform the usual voice and coverage tests.
WLAN Application Gateway 2246 installation on existing system
Follow the steps in Procedure 24 “Certifying wireless handsets on an
existing system” (page 161) to certify the wireless handsets on an existing
system.
Procedure 24
Certifying wireless handsets on an existing system
Step Action
1 Place a test call.
2 Test the features on each handset to ensure the system is
working properly.
3 Test the application on each handset.
4 Consult the application provider for specific test procedures.
--End--
Software
The WLAN Application Gateway 2246 and the handset use proprietary
software programs. The software versions that are running on the system
components can be displayed through the System Status screen.
Nortel provides information about software updates, and how to obtain the
software (for example, downloading from the Nortel Web site).
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 03.04 Standard
23 September 2008
Copyright © 2004–2008 Nortel Networks
.