Filter
Top Products
Free the serial port for administrative purposes 165
Table 21
Handset Planning Worksheet (cont’d.)
OAI
Port MAC Address User Name
Dialing
Ext. IP Address (if static)
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Free the serial port for administrative purposes
If the serial port is being used as the primary communication link with the
Application Server, you must enter the OAI command to free the serial port
to allow it to be used for administrative purposes, such as changing the IP
address of the WLAN Application Gateway 2246.
To free the serial port to allow it to be used for administrative purposes,
follow the steps in Procedure 13 “Connecting to the WLAN Application
Gateway 2246 through a serial port” (page 146).
After configuring the WLAN Application Gateway 2246, perform the
following steps to again use the serial port as the communication link with
the Application Server.
Procedure 27
Using the serial port as the Application Server communication link
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 03.04 Standard
23 September 2008
Copyright © 2004–2008 Nortel Networks
.