Nortel Networks 1000 Switch User Manual


 
Wireless telephone network description 15
EN 61000-3-2 Harmonic Current Emissions
EN 61000-3-3 Flicker Emissions
WARNING
Changes or modifications to this equipment not approved by
Nortel can cause this equipment to not comply with part 15
of the FCC rules and void the user’s authority to operate this
equipment.
WARNING
This equipment contains no user-serviceable parts inside. Refer
servicing to qualified service personnel.
ATTENTION
FCC CFT 47 Part 15.21 statement:
"Note: This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense."
ATTENTION
EN 55022/SICPR22 statement:
"Warning
This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures".
Shielded cable
Nortel recommends the use of shielded cable for all external signal
connections in order to maintain FCC Part 15 emissions requirements.
Wireless telephone network description
The Nortel WLAN wireless telephone network consists of the following
components:
Call Server
DHCP server
Trivial File Transfer Protocol (TFTP) server
Firewall
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 03.04 Standard
23 September 2008
Copyright © 2004–2008 Nortel Networks
.