Filter
Top Products
Software 163
FTP <hostname>
OR
FTP <IP address>.
3 Log on using the default administrator logon and password:
admin
admin
4 At the FTP prompt, type binary.
5 At the FTP prompt, rename and transfer the functional code file
to the client server or WLAN Application Gateway 2246.
put mog700.bin fnctla.bin
where
MOG700.bin is the downloaded file.
fnctla.bin is the new name of the file.
6 After the file transfer is complete, use the Quit command to quit
FTP.
7 Navigate to the NetLink OAI System screen for the WLAN
Application Gateway 2246
8 Select System Status.
9 Select Software Versions to verify that software versions for the
WLAN Application Gateway 2246 are correct.
10 Reset the system through the OAI Box Configuration screen in
order to restore Maintenance Lock to N.
--End--
ATTENTION
You can use a GUI FTP client instead of the described command line FTP
procedure.
TFTP software updates Systems
The WLAN Application Gateway 2246 uses proprietary software programs.
You can display the software versions running on the system components
through the WLAN Application Gateway 2246 System Status screen.
Nortel provides information about software updates and how to obtain the
software (for example, downloading from the Nortel Web site).
Follow the steps in Procedure 26 “Loading software updates” (page 164) to
load software updates.
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 03.04 Standard
23 September 2008
Copyright © 2004–2008 Nortel Networks
.