Filter
Top Products
Continuing configuration through Telnet 157
Feature programming
The application function is accessed in the handset by pressing the FCN
button plus a second button. The button used to access the application
feature from the wireless handset is configured through the Feature
Programming option.
FCN 1-6 are hard-coded. If the application function is programmed to use
FCN 1-6, the hard-coded function is overridden. Nortel recommends using
7, 8, or 9 for the application function.
Follow the steps in Procedure 21 “Programming a feature” (page 157) to
program an application feature for the wireless handsets.
Procedure 21
Programming a feature
Step Action
1 From the NetLink OAI System screen, select Feature
Programming and press Enter.
2 At the Feature Programming screen , use the arrow keys to
select the function number 7, 8, or 9 to associate with the
application.
3 Type any label up to six characters.
The label you type here appears on the handset telephone
display screen next to the assigned number on the FCN menu.
--End--
Setting or changing a password
You can configure a unique password for the WLAN Application Gateway
2246. The password restricts access to administrative functions of the
device.
WARNING
Record the password and store it in a safe place. If the
password is lost or forgotten, contact Nortel Technical Support.
Follow the steps in Procedure 22 “Setting or changing a password”
(page 158) to configure or change a password on the WLAN Application
Gateway 2246.
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 03.04 Standard
23 September 2008
Copyright © 2004–2008 Nortel Networks
.