Filter
Top Products
Diagnostic Tools 195
P:pppp = pair-wise key security
Any = soft key to toggle between single and multiple
ESSID mode
Smry = soft key to return to summary display
Run Site Survey for the WLAN Handset 6120/6140
Site Survey is used to evaluate the facility coverage before certifying that
an installation is complete. It can also be used at any time to evaluate
coverage by testing signal strength, to gain information about an AP, and
to scan an area to look for all APs, regardless of SSID. The information
available through Site Survey includes:
•
SSID
• beacon interval
•
information regarding support of various protocols and standards, as
required
•
current security configuration
When Run Site Survey begins, it is in single SSID mode. Press the Any
soft key to switch to all APs (regardless of SSID) mode; the Any soft key
changes to MyID. The display looks like the following in multiple AP mode:
111111 -22 33
111111 -22 33
111111 -22 33
111111 -22 33
MyID
444
444
444
444
Detl
where
111111 = last three octets of the SSID for the
discovered AP
22 = signal strength of the specified AP
33 = channel number of the specified AP
4444 = DTIM interval configured for the specified AP
MyID = soft key to toggle between single and any SSID
mode
Detl = soft key to toggle between summary and detail
screens
The following display shows three APs configured with an SSID that
matches that of the handset. The first has a signal strength of –28dBm,
and is configured on channel 2 with a beacon interval of 100 ms. The
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 03.04 Standard
23 September 2008
Copyright © 2004–2008 Nortel Networks
.