Filter
Top Products
Continuing configuration through Telnet 153
Figure 27
WLAN Application Gateway 2246 connection to Application Server through the LAN
Connect to Application Server through a modem
Connect the modem to the Gateway serial port using a cable that
conforms to RS-232 standards for DTE-to-DCE connections. See Figure
28 "WLAN Application Gateway 2246 connection to Application Server
through a modem" (page 153).
Figure 28
WLAN Application Gateway 2246 connection to Application Server through a modem
Continuing configuration through Telnet
After the IP address for the WLAN Application Gateway 2246 is
configured, the WLAN Application Gateway 2246 reset and connected to
the LAN and the Application Server, Telnet can be used to continue the
WLAN Application Gateway 2246 configuration.
Connecting through Telnet
Connection to the WLAN Application Gateway 2246 can be done through
the network using Telnet. Telnet can only be used after the WLAN
Application Gateway 2246 IP address is configured.
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 03.04 Standard
23 September 2008
Copyright © 2004–2008 Nortel Networks
.