Filter
Top Products
196 Troubleshooting WLAN IP Telephony installations
second has a signal strength of –48dBm, and is configured on channel
6 with a beacon interval of 200 ms. The third has a signal strength of
–56dBm and is configured on channel 11 with a beacon interval of 100 ms.
ab7bc8 -28 02
2ae578 -48 06
2ae596 -56 11
Any
100
200
100
Detl
When you select Any SSID mode, the summary display contains the first
six characters of the APs SSID instead of the beacon interval, as shown in
the following example.
ab7b -28 02
2ae5 -48 06
2ae5 -56 11
Any
ALPHA
WSMTES
voice
Detl
In detail mode, the display appears as follows. The left and right arrow
keys move between AP indices.
i:bbbbb sn ch bcn
eeeeeeeeeee DGHI
rrrrrrrrrrrrr+xxxx
mmm G:gggg P:pppp
Any Smry
where
i = index of selected AP (value is from 0 to 3
inclusive)
bbbbb = last three octets of the SSID for a discovered
AP
sn = signal strength in -dBm
ch = channel
bcn = beacon interval
eeeeeeeeeee = SSID (up to first 11 characters)
DGHI = standards supported
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 03.04 Standard
23 September 2008
Copyright © 2004–2008 Nortel Networks
.