Filter
Top Products
46 C1553M-B (4/05)
6. Optional: repeat steps 3-5 to add time servers as necessary.
7. Optional: Each time server that you add to the list is checked by default. If you do not want to use a particular time server click it to uncheck
the server. If more than one time server is selected, the driver will attempt to synchronize to the first selected server in the list. If that fails,
the driver will attempt to synchronize to the next selected server in the list, and so on, until synchronization succeeds or there are no more
selected servers.
8. Optional: To move a time server to a higher or lower order in the list, click the time server, and then click the up or down arrow.
Figure 38. Moving a Time Server
9. Specify how often you want the device driver’s clock synchronized with the time server’s clock in the Synchronize minutes field.
10. Click OK to close the Configure Driver dialog box.
Remove a Time Server
1. Start the PelcoNet MPEG driver. The Configure Driver dialog box appears.
2. Click the Time Server tab. The Time Server fields appear.
3. Click the server you wish to remove from the list, and then click Remove.
4. Optional: repeat step 3 to remove additional time servers as necessary.
5. Click OK to close the Configure Driver dialog box.