Filter
Top Products
C1553M-B (4/05) 99
CONFIGURE THE GENERAL TAB
Figure 116. General Tab for CM9760-REL
Use the General tab to name and describe the relay unit. The device name can be a maximum of 50 characters. You cannot use single or double
quotation marks in a name, but you can use any other letter, digit, or special character. Device names are not case sensitive. The optional
description appears in the Object Browser beside the device name.
CONFIGURE THE PROPERTIES TAB
Figure 117. Properties Tab for CM9760-REL
Use the Properties tab to configure the animation settings of the CM9760-REL unit’s icon viewed on maps in the VMX300(-E) client. Click Choose
next to each condition to select the color settings for that condition. Note that you can configure a different color setting for each relay unit.
Unknown state: When the relay unit’s Status property equals Unknown, the icon is the color specified here.
Normal state: When the relay unit’s Status property equals Normal, the icon is the color specified here.
Alarm state: When the relay unit’s Alarm write property equals True, the icon changes to the color specified here. If you change either Color 1
or Color 2, then the icon flashes alternately between the two colors when the relay unit is in the alarm state. Note, however,
that flashing icons can increase the CPU workload.